A radius or shaped edge must be defined before selecting a profiling route.
APPLICATION SOLUTION · PROFILING
Ceramic Tile Radius Profiling
Choose a profiling wheel from the required rounded-edge section. Send the R profile, tile thickness and desired finish, then compare the bond and wheel dimensions for rough shaping or fine rounding.
Material scope
Ceramic tile
Processing focus
Arc grindingFine roundingProfiling
Equipment context
Handheld angle grinderTable-type bevelerTable-type polisher
BUYER CONTEXT
Define the profile
before the wheel.
Start with the radius or shaped edge required, then separate initial arc work from final rounding. Adding the machine type creates a clearer basis for a custom profiling discussion.
Rough arc processing and fine rounding are different stages.
The available profiling machine shapes the product conversation.
PROCESSING ROUTE
Build the selection
around the actual job.
- 01
Define the profile
Start with the intended radius or shaped edge instead of a generic wheel request.
- 02
Set the process stage
Clarify whether the operation is rough arc work or fine rounding.
- 03
Review the profiling wheel series
Compare metal-bond and resin-bond profiling wheels and radius options on the product page.
RECOMMENDED TOOL ROUTE
Tool stages for
this processing job.
Start from the stage you need to complete. The linked product series lets you review the available configurations once the material and machine are confirmed.
What to compare before choosing
| Product series | Selection considerations |
|---|---|
| Diamond Profiling Wheels | Send the required R profile and a section drawing with the tile thickness. Match metal-bond or resin-bond options to rough shaping or fine rounding, then confirm the diameter and mounting interface. |
Diamond Profiling Wheels
Send the required R profile and a section drawing with the tile thickness. Match metal-bond or resin-bond options to rough shaping or fine rounding, then confirm the diameter and mounting interface.
View specifications
Radius profiling series
Diamond Profiling Wheels
Metal-bond and resin-bond profiling wheels for rough and fine shaping of curved ceramic tile edges.
View product series ↗SELECTION LOGIC
Confirm the project
before the quote.
Required profile
Describe the radius or shaped edge that the tile-processing line needs to create.
Process stage
Separate rough arc processing from fine rounding when preparing the tool route.
Equipment
State whether the job uses an angle grinder, table-type beveler, polisher or stone edge grinder.
Custom brief
For custom or OEM requirements, combine the profile, machine and required processing stage.
CUSTOM & OEM PROJECTS
Custom & OEM
support.
Custom and OEM requests can be reviewed around your material, processing operation, machine and project-specific requirements.
01Ceramic tile material
02Required radius or profile
03Rough or fine process stage
04Machine type
APPLICATION FAQ
Buyer FAQs,
answered.
- 01Why is the required radius important for a profiling-wheel discussion?
- The finished edge shape is the central processing requirement. Provide it with the machine and process stage so the discussion begins with the profile you need to make.
- 02Can rough and fine profiling be discussed together?
- Yes. Describe the complete profile route, while keeping the initial arc stage and final rounding stage clear.